The Tonutti pull type carted rake has two single rake frames operated by independent acting cylinders, which use tractor hydraulics to raise and lower the finger wheels from transport to field position.
This allows the operator to operate the rake from the tractor seat.
The tyne shape and special steel used in manufacturing have been studied to give them the best flexibility.
This design allows for gentle contact with the forage avoiding soil contamination.
The final result is a fluffy windrow suitable to form an even and compact bale.
The two rake main frames, pivot and slide on the trolley frame giving you the possibility of setting the rake working width at your convenience, maintaining the optimum inclination in respect to the crop you are raking.
A turnbuckle allows you to vary the wheel inclination according to the quantity of type of hay you are raking.
The locking pin allows one side raking option if required.
The wide frame of the trolley allows for maximum stability of the rake even in rough terrain.
A shock absorbing floating spring, one for each rake, relieves the ground pressure on the finger wheels.
An hydraulic centre kicker wheel is available as an optional and will turn your windrow by half a turn, also moving the crop in the middle of the rake and forming a better compact windrow in order to obtain a better bale.
Storage Position Side View
Center Kicker Wheel Kit (Optional)
Independent Acting Cylinders
Shock Absorbing Floating Spring And Adjustable Turnbuckle
· 40 special alloy steel tynes per wheel
· Heavy-duty greasable bearings in each hub
· A strong tubular steel frame
· Twin hydraulic rams for lifting rake arms
